- Joined
- Feb 7, 2015
- Messages
- 31
All 3 micrometer wheels (x,y, and quill) will not rotate to zero out. I have to write down the number and add or subtract to get the stoping point. The wheels have knurling on them like they could be rotated. There is a set screw that looks to be a lock after adjustment. Everything on this machine has been rusted tight and required my removing and cleaning. I was thinking of making a puller similar to a bearing splitter to pull the wheels off to clean and see if they will rotate on the shaft. Does that seem like a good idea?
![IMG_1703.jpg IMG_1703.jpg](https://www.hobby-machinist.com/data/attachments/54/54794-1eba4112a5b83677b87a776fda2205cd.jpg)
![IMG_1703.jpg IMG_1703.jpg](https://www.hobby-machinist.com/data/attachments/54/54794-1eba4112a5b83677b87a776fda2205cd.jpg)