- Joined
- Aug 1, 2022
- Messages
- 4
I own a JET-16 Table Top Mill/Drill and the switch just burnt out on the unit. I am well versed with machining but not with electrical components and switches. I have included the photos of the switch to help in figuring out what I need to purchase to replace the switch. This model is not current and I'd rather source the switch myself then to work through Jet in getting it replaced. I would appreciate any advice on what switch to purchase. I like the button switch that was on the unit. The unit is in excellent condition and has the original motor. One speed - one direction motor. Wired currently for 220V household current.
![IMG_20220802_153641678.jpg IMG_20220802_153641678.jpg](https://www.hobby-machinist.com/data/attachments/373/373248-64e69d8751197b6962de6f5f019f6fb8.jpg)
![IMG_20220802_153706557.jpg IMG_20220802_153706557.jpg](https://www.hobby-machinist.com/data/attachments/373/373249-21fc38b521b05b97cf247c9c32dc33a9.jpg)
![IMG_20220802_153711834.jpg IMG_20220802_153711834.jpg](https://www.hobby-machinist.com/data/attachments/373/373250-e734fcaeb0ddfc40fb5a35bb73cd1dae.jpg)
![IMG_20220802_153723047.jpg IMG_20220802_153723047.jpg](https://www.hobby-machinist.com/data/attachments/373/373251-af33cda27cfe7a1a4bc0cd7412ff5d23.jpg)
![IMG_20220802_153641678.jpg IMG_20220802_153641678.jpg](https://www.hobby-machinist.com/data/attachments/373/373248-64e69d8751197b6962de6f5f019f6fb8.jpg)
![IMG_20220802_153706557.jpg IMG_20220802_153706557.jpg](https://www.hobby-machinist.com/data/attachments/373/373249-21fc38b521b05b97cf247c9c32dc33a9.jpg)
![IMG_20220802_153711834.jpg IMG_20220802_153711834.jpg](https://www.hobby-machinist.com/data/attachments/373/373250-e734fcaeb0ddfc40fb5a35bb73cd1dae.jpg)
![IMG_20220802_153723047.jpg IMG_20220802_153723047.jpg](https://www.hobby-machinist.com/data/attachments/373/373251-af33cda27cfe7a1a4bc0cd7412ff5d23.jpg)