- Joined
- Aug 29, 2019
- Messages
- 1,118
As I have already posted I put an EG-Dro on the dross slide of my Clausing 100 lathe and being the purist I am I did not want to drill or tap any new holes. So, the entire set up is mounted with magnets. I completed the shield for swarf today and as you can tell I went to the junk pile behind my shop for the material. The aluminum rail was given to me by someone who was remodeling a commercial building and is the bottom rail of sliding door frame. Took some work to whittle down the piece I needed. But what is time when it is a hobby you enjoy. in my world Hobbies should be fun and creative. Anyway here is some pics. The pictures with the indicators are jusst to show the kind of magnets I used. Very handy when limited for space and come with hooks for hanging things.
Attachments
-
IMG_2571.JPG285.8 KB · Views: 26
-
IMG_2537.JPG515.7 KB · Views: 25
-
IMG_2538.JPG479 KB · Views: 23
-
IMG_2539.JPG519 KB · Views: 21
-
IMG_2540.JPG522.5 KB · Views: 19
-
IMG_2541.JPG398.9 KB · Views: 18
-
IMG_2542.JPG301 KB · Views: 17
-
IMG_2543.JPG456.8 KB · Views: 15
-
IMG_2544.JPG316.1 KB · Views: 13
-
IMG_2545.JPG146.8 KB · Views: 16
-
IMG_2564.JPG346.6 KB · Views: 17
-
IMG_2565.JPG349 KB · Views: 19
-
IMG_2566.JPG343.5 KB · Views: 18
-
IMG_2567.JPG316.7 KB · Views: 19
-
IMG_2569.JPG297.4 KB · Views: 19
-
IMG_2570.JPG230.2 KB · Views: 25
Last edited: