- Joined
- Sep 22, 2010
- Messages
- 7,223
Keith Fenner
Owner of an Old School Job Shop; Turn Wright Machine Works.Conceived in New York, Born and raised in California, Majored Art in school, shared in the care taking and use of a 42 foot trimaran for a year, Raced Dune Buggies with my father, little eliminator class, taking over all points winner for the west coast in 1971, after school, I started my career in navel ship repair as an outside machinist working as a civilian contractor at the helper level, 13.5 years later I had worked on almost every navy vessel in San Diego's harbor, 32nd Street, North Island and Point Loma and had added the classification of an inside machinist to my cap, and the capableness of holding any personnel level in the work force, after that I worked for two small companies that I helped in their growing and in return I gained my welding and shafting experience, I took a leave of absence from all of that to start my own business in 1994, Turn Wright Machine Works, homesteading my talents hear on Cape Cod
These are now being loaded into our video library under category "Keith Fenner Videos"!
http://www.hobby-machinist.com/vbtube.php?do=cat&id=16&o=0&page=0
Owner of an Old School Job Shop; Turn Wright Machine Works.Conceived in New York, Born and raised in California, Majored Art in school, shared in the care taking and use of a 42 foot trimaran for a year, Raced Dune Buggies with my father, little eliminator class, taking over all points winner for the west coast in 1971, after school, I started my career in navel ship repair as an outside machinist working as a civilian contractor at the helper level, 13.5 years later I had worked on almost every navy vessel in San Diego's harbor, 32nd Street, North Island and Point Loma and had added the classification of an inside machinist to my cap, and the capableness of holding any personnel level in the work force, after that I worked for two small companies that I helped in their growing and in return I gained my welding and shafting experience, I took a leave of absence from all of that to start my own business in 1994, Turn Wright Machine Works, homesteading my talents hear on Cape Cod
These are now being loaded into our video library under category "Keith Fenner Videos"!
http://www.hobby-machinist.com/vbtube.php?do=cat&id=16&o=0&page=0
What's in your box? The giveaway Part Three
by Keith Fenner • 304 views • 4 hours agoWhat's in your Box? The Giveaway Part three; just before we open the box and add a few more tools, we take a look at a Mail Call job, which was jus...
- [COLOR=#FFFFFF !important]18:32[/COLOR]
Checking out the Beaver!
by Keith Fenner • 8,203 views • 1 week agoChecking out the Beaver; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minimum of 2,000 RPM's and...
- [COLOR=#FFFFFF !important]28:13[/COLOR]
6 / 6 The Million Dollar Rest! Mail Call
by Keith Fenner • 8,320 views • 1 week agoThe million Dollar Rest; this is a Mail Call project, sent to us by Tony Bonaviso, owner of Consolidated Machine & Welding, in New York, Tony has a...
- [COLOR=#FFFFFF !important]30:28[/COLOR]
5 / 6 The Million Dollar Rest! Mail Call
by Keith Fenner • 6,215 views • 1 week agoThe million Dollar Rest; this is a Mail Call project, sent to us by Tony Bonaviso, owner of Consolidated Machine & Welding, in New York, Tony has a...
- [COLOR=#FFFFFF !important]31:58[/COLOR]
4 / 6 The Million Dollar Rest! Mail Call
by Keith Fenner • 6,673 views • 1 week agoThe million Dollar Rest; this is a Mail Call project, sent to us by Tony Bonaviso, owner of Consolidated Machine & Welding, in New York, Tony has a...
- [COLOR=#FFFFFF !important]30:40[/COLOR]
3 / 6 The Million Dollar Rest! Mail Call
by Keith Fenner • 7,066 views • 1 week agoThe million Dollar Rest; this is a Mail Call project, sent to us by Tony Bonaviso, owner of Consolidated Machine & Welding, in New York, Tony has a...
- [COLOR=#FFFFFF !important]30:34[/COLOR]
2 / 6 The Million Dollar Rest! Mail Call
by Keith Fenner • 8,576 views • 1 week agoThe million Dollar Rest; this is a Mail Call project, sent to us by Tony Bonaviso, owner of Consolidated Machine & Welding, in New York, Tony has a...
- [COLOR=#FFFFFF !important]32:32[/COLOR]
1 / 6 The Million Dollar Rest! Mail Call
by Keith Fenner • 9,646 views • 1 week agoThe million Dollar Rest; this is a Mail Call project, sent to us by Tony Bonaviso, owner of Consolidated Machine & Welding, in New York, Tony has a...
- [COLOR=#FFFFFF !important]38:23[/COLOR]
Whats in your Box? The Giveaway Part Two
by Keith Fenner • 5,345 views • 2 weeks agoWhat's in your Box? The Giveaway Part Two;
After adding a few more Tools to the tool chest, we set the outlines for the Giveaway. The Entry I...
- [COLOR=#FFFFFF !important]14:56[/COLOR]
The Broken Beaver Part Ten Grand Finale
by Keith Fenner • 8,413 views • 3 weeks agoThe Broken Beaver Part Ten, The Grand Finale; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minim...
- [COLOR=#FFFFFF !important]30:28[/COLOR]
The Broken Beaver Part Nine
by Keith Fenner • 6,164 views • 3 weeks agoThe Broken Beaver Part Nine; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minimum of 2,000 RPM's...
- [COLOR=#FFFFFF !important]31:39[/COLOR]
The Broken Beaver Part Eight
by Keith Fenner • 7,134 views • 3 weeks agoThe Broken Beaver Part Eight; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minimum of 2,000 RPM'...
- [COLOR=#FFFFFF !important]31:02[/COLOR]
The Broken Beaver Part Seven
by Keith Fenner • 7,937 views • 4 weeks agoThe Broken Beaver Part Seven; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minimum of 2,000 RPM'...
- [COLOR=#FFFFFF !important]31:23[/COLOR]
The Broken Beaver Part Six
by Keith Fenner • 7,875 views • 4 weeks agoThe Broken Beaver Part Six; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minimum of 2,000 RPM's ...
- [COLOR=#FFFFFF !important]32:01[/COLOR]
The Broken Beaver Part Five
by Keith Fenner • 8,822 views • 4 weeks agoThe Broken Beaver Part Five; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minimum of 2,000 RPM's...
- [COLOR=#FFFFFF !important]32:03[/COLOR]
The Broken Beaver Part Four
by Keith Fenner • 7,839 views • 1 month agoThe Broken Beaver Part Four; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minimum of 2,000 RPM's...
- [COLOR=#FFFFFF !important]30:36[/COLOR]
The Broken Beaver Part Three
by Keith Fenner • 8,557 views • 1 month agoThe Broken Beaver Part three; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minimum of 2,000 RPM'...
- [COLOR=#FFFFFF !important]33:57[/COLOR]
The Broken Beaver Part Two
by Keith Fenner • 9,827 views • 1 month agoThe Broken Beaver Part Two; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minimum of 2,000 RPM's ...
- [COLOR=#FFFFFF !important]33:53[/COLOR]
The Broken Beaver
by Keith Fenner • 11,997 views • 1 month agoThe Broken Beaver; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minimum of 2,000 RPM's and the s...
- [COLOR=#FFFFFF !important]31:15[/COLOR]
What's in your Box? The Giveaway
by Keith Fenner • 4,638 views • 1 month agoWhat's in your Box, the Give Away; we are putting together a machinist tool chest and giving it away to a deserving person. The machinist tool ches...
- [COLOR=#FFFFFF !important]13:50[/COLOR]
How my balls are hanging!
by Keith Fenner • 7,766 views • 1 month agoHow my Balls are Hanging! Well Vanessa talked me into showing you how my balls are hanging, after we finish decorating the tree, but before we go i...
- [COLOR=#FFFFFF !important]29:08[/COLOR]
It's how you look playing the game! Part 7
by Keith Fenner • 7,884 views • 1 month agoWe are all very competitive from time to time, it could be on a race track or two guys working side by side throwing around some testosterone, at l...
- [COLOR=#FFFFFF !important]30:03[/COLOR]
It's how you look playing the game! Part 6
by Keith Fenner • 6,219 views • 1 month agoWe are all very competitive from time to time, it could be on a race track or two guys working side by side throwing around some testosterone, at l...
- [COLOR=#FFFFFF !important]34:12[/COLOR]
It's how you look playing the game! Part 5
by Keith Fenner • 7,228 views • 1 month agoWe are all very competitive from time to time, it could be on a race track or two guys working side by side throwing around some testosterone, at l...
- [COLOR=#FFFFFF !important]30:27[/COLOR]
It's how you look playing the game! Part 4
by Keith Fenner • 6,023 views • 1 month agoWe are all very competitive from time to time, it could be on a race track or two guys working side by side throwing around some testosterone, at l...
- [COLOR=#FFFFFF !important]31:21[/COLOR]
It's how you look playing the game! Part 3
by Keith Fenner • 6,548 views • 1 month agoWe are all very competitive from time to time, it could be on a race track or two guys working side by side throwing around some testosterone, at l...
- [COLOR=#FFFFFF !important]32:02[/COLOR]
It's how you look playing the game! Part 2
by Keith Fenner • 7,322 views • 1 month agoWe are all very competitive from time to time, it could be on a race track or two guys working side by side throwing around some testosterone, at l...
- [COLOR=#FFFFFF !important]33:08[/COLOR]
It's how you look playing the game!
by Keith Fenner • 10,936 views • 1 month agoWe are all very competitive from time to time, it could be on a race track or two guys working side by side throwing around some testosterone, at l...
- [COLOR=#FFFFFF !important]16:34[/COLOR]
What's in your Box? Part Seven
by Keith Fenner • 4,293 views • 1 month agoWhat's in your Box? Part Seven; The final episode of the video premier; what's in your Box? I'm going to give away a full machinist tool Chest in ...
- [COLOR=#FFFFFF !important]26:08[/COLOR]
What's in your Box? Part Six
by Keith Fenner • 3,901 views • 1 month agoWhat's in your Box? Part Six; let's take a tour of those boxes we put in storage last month! After I started editing this series of videos, it bec...
- [COLOR=#FFFFFF !important]16:06[/COLOR]
The Wright Tree
by Keith Fenner • 4,544 views • 2 months agoThe Wright Tree; Well dose any other machinist act this anal about their tree? I have this thing about ordainments hanging freely. I also introduc...
- [COLOR=#FFFFFF !important]31:06[/COLOR]
What's in your Box? Part Five
by Keith Fenner • 3,789 views • 2 months agoWhat's in your Box? Part Five; let's take a tour of those boxes we put in storage last month! After I started editing this series of videos, it be...
- [COLOR=#FFFFFF !important]30:40[/COLOR]
What's in your Box? Part Four
by Keith Fenner • 3,892 views • 2 months agoWhat's in your Box? Part Four; let's take a tour of those boxes we put in storage last month! After I started editing this series of videos, it be...
- [COLOR=#FFFFFF !important]38:57[/COLOR]
Between the Boxes Part Two
by Keith Fenner • 13,051 views • 2 months agoBetween the Boxes Part Two; So! I was in the middle of editing the {What's in your Box?} Videos and this job came in! A couple of you were asking t...
- [COLOR=#FFFFFF !important]29:15[/COLOR]
Between the Boxes
by Keith Fenner • 42,198 views • 2 months agoBetween the Boxes; So! I was in the middle of editing the {What's in your Box?} Videos and this job came in! A couple of you were asking to get bac...
- [COLOR=#FFFFFF !important]31:27[/COLOR]
What's in your Box? Part Three
by Keith Fenner • 4,770 views • 2 months agoWhat's in your Box? Part Three; let's take a tour of those boxes we put in storage last month! After I started editing this series of videos, it b...
- [COLOR=#FFFFFF !important]31:58[/COLOR]
What's in your Box? Part Two
by Keith Fenner • 4,765 views • 2 months agoWhat's in your Box? Part Two; let's take a tour of those boxes we put in storage last month! After I started editing this series of videos, it bec...
- [COLOR=#FFFFFF !important]32:32[/COLOR]
What's in your Box?
by Keith Fenner • 12,681 views • 2 months agoWhat's in your Box? ; Let's take a tour of those boxes we put in storage last month! After I started editing this series of videos, it became clea...
- [COLOR=#FFFFFF !important]29:21[/COLOR]
Belting & Lacing Part Two
by Keith Fenner • 4,268 views • 2 months agoBelting & Lacing Part Two; I jump in with this video for two reasons, OK three reasons, one to finish a commitment of doing a video that was reques...
- [COLOR=#FFFFFF !important]35:57[/COLOR]
Belting & Lacing Part One
by Keith Fenner • 6,467 views • 2 months agoBelting & Lacing Part One; I jump in with this video for two reasons, OK three reasons, one to finish a commitment of doing a video that was reques...
- [COLOR=#FFFFFF !important]23:29[/COLOR]
Getting High Steering Part Two
by Keith Fenner • 7,363 views • 2 months agoGetting High Steering; Off Roaders are always trying to get more ground clearance and this is one ways to get your steering up a little higher! My ...
- [COLOR=#FFFFFF !important]32:53[/COLOR]
Getting High Steering
by Keith Fenner • 9,710 views • 2 months agoGetting High Steering; Off Roaders are always trying to get more ground clearance and this is one ways to get your steering up a little higher! My ...
- [COLOR=#FFFFFF !important]10:16[/COLOR]
Two as per Sample Please!
by Keith Fenner • 6,958 views • 2 months agoTwo as per Sample Please; This is the second of three videos that were removed and adjusted to be free of any copyrights issues, that kept them fro...
- [COLOR=#FFFFFF !important]11:21[/COLOR]
McDermott Studios
by Keith Fenner • 5,552 views • 2 months agoMcDermott Studios; is one of three videos that I had taken off my channel collection due to questionable copyright issues. I have replaced the back...
- [COLOR=#FFFFFF !important]28:47[/COLOR]
PTOGAIN 2
by Keith Fenner • 5,780 views • 3 months agoPTOGAIN 2 ( PTO + again -- first a, + second half) Well I thought I was done with this job, but come to find out, I had only sent it out to be stup...
- [COLOR=#FFFFFF !important]30:16[/COLOR]
PTOGAIN
by Keith Fenner • 6,784 views • 3 months agoPTOGAIN ( PTO + again -- first a ) Well I thought I was done with this job, but come to find out, I had only sent it out to be stupid tested! Pers...
- [COLOR=#FFFFFF !important]30:57[/COLOR]
PTO Part Two
by Keith Fenner • 6,062 views • 3 months agoPTO Part Two; Power Take Off, are controlled in many different ways and in this case, the customers Ten Wheeler is with a pneumatic cylinder! A dri...
- [COLOR=#FFFFFF !important]33:14[/COLOR]
PTO
by Keith Fenner • 8,920 views • 3 months agoPTO; Power Take Off, are controlled in many different ways and in this case, the customers Ten Wheeler is with a pneumatic cylinder! A drive shaft ...
- [COLOR=#FFFFFF !important]26:43[/COLOR]
Nesting 123
by Keith Fenner • 3,077 views • 3 months agoNesting 1, 2, 3; I have just recently picked up the new Nesting Software for my PlasmaCAM and starting to get familiar with the program! I also add...
- [COLOR=#FFFFFF !important]38:28[/COLOR]
CSI Yard Man Part 2
by Keith Fenner • 9,180 views • 3 months agoCSI Yard-Man Part 2; A friend picks up a splitter and discovers a leak and wants me to check it out, so we tear it down and inspect. This cylinder ...
- [COLOR=#FFFFFF !important]37:15[/COLOR]
CSI Yard Man Part 1
by Keith Fenner • 10,641 views • 3 months agoCSI Yard-Man Part 1; A friend picks up a splitter and discovers a leak and wants me to check it out, so we tear it down and inspect. This cylinder ...
- [COLOR=#FFFFFF !important]45:42[/COLOR]
American Crane Part Eight
by Keith Fenner • 8,278 views • 3 months agoAmerican Crane Part Eight; we are back on a roll, with the sprocket assembly, we start the Mods needed to adjust the fit to the new Masking's. A co...
- [COLOR=#FFFFFF !important]42:46[/COLOR]
American Crane Part Seven
by Keith Fenner • 6,630 views • 3 months agoAmerican Crane Part seven; we are back on a roll, with the sprocket assembly, we start the Mods needed to adjust the fit to the new Masking's. A co...
- [COLOR=#FFFFFF !important]43:20[/COLOR]
American Crane Part Six
by Keith Fenner • 9,472 views • 3 months agoAmerican Crane Part six; we are back on a roll, with the sprocket assembly, we start the Mods needed to adjust the fit to the new Masking's. A coup...
- [COLOR=#FFFFFF !important]50:02[/COLOR]
Weekend Warrior
by Keith Fenner • 8,428 views • 3 months agoWeekend Warrior; I had a visit from one of my customer late Wednesday evening we got an emergency coming up, can you help us out ? We know how mu...
- [COLOR=#FFFFFF !important]32:57[/COLOR]
Sliding plates
by Keith Fenner • 7,130 views • 3 months agoSliding Plates; this is a diamond plate project that's bigger than the table. The customer supplied the material and the wooden pattern. I create t...
- [COLOR=#FFFFFF !important]41:23[/COLOR]
ISAW 3
by Keith Fenner • 6,215 views • 4 months agoISAW; is my new, used, metal band saw, that John the owner of Apple Machine & Tool, over in Falmouth here on the cape gave me a couple months ago, ...
- [COLOR=#FFFFFF !important]48:36[/COLOR]
ISAW 2
by Keith Fenner • 7,185 views • 4 months agoISAW; is my new, used, metal band saw, that John the owner of Apple Machine & Tool, over in Falmouth here on the cape gave me a couple months ago, ...
- [COLOR=#FFFFFF !important]48:40[/COLOR]
Deer John Part Two
by Keith Fenner • 14,500 views • 4 months agoDeer John;
Note: Break ups with a Deer John letter are worst than a Dear John letter!
Dear John I was using your John Deer in the stump dump and...
- [COLOR=#FFFFFF !important]33:45[/COLOR]
Deer John Part One
by Keith Fenner • 16,598 views • 4 months agoDeer John;
Note: Break ups with a Deer John letter are worst than a Dear John letter!
Dear John I was using your John Deer in the stump dump an...
- [COLOR=#FFFFFF !important]43:11[/COLOR]
After the Plumbing gets done
by Keith Fenner • 6,740 views • 4 months agoAfter the Plumbing gets done: Ever push to finish one job to move on to the next and have an oversight that runs into a bit more time than planned?...
- [COLOR=#FFFFFF !important]48:12[/COLOR]
No Lip Service
by Keith Fenner • 5,540 views • 4 months agoNo Lip Service; Just a walk the talk on a lip job! I finally replace the temporary lip around the water tray on my PlasmaCAM, which I added when I ...
- [COLOR=#FFFFFF !important]25:46[/COLOR]
Just Between, You & Me!
by Keith Fenner • 6,601 views • 4 months agoJust Between You & Me; I give thanks to the contributions I have received, since I have started my YouTube's, and what has kept the Ads and commerc...
- [COLOR=#FFFFFF !important]16:26[/COLOR]
Welcome to Turn Wright Machine Works in HD
by Keith Fenner • 4,819 views • 4 months agoThis is a test to see if HD file loads as an HD! Welcome to, Turn Wright Machine Works; I've had a few request on a tour of the shop, I have to chu...
- [COLOR=#FFFFFF !important]39:25[/COLOR]
Double Suction
by Keith Fenner • 10,805 views • 4 months agoDouble Suction; Well the pump is one and the other seems to be the options that are presented to you by the customer! In the line of repair busine...
- [COLOR=#FFFFFF !important]16:26[/COLOR]
Welcome to Turn Wright Machine Works
by Keith Fenner • 8,215 views • 4 months agoWelcome to, Turn Wright Machine Works; I've had a few request on a tour of the shop, I have to chuckle because after viewing most of my videos you ...
- [COLOR=#FFFFFF !important]11:17[/COLOR]
What's Cooking on my PlasmaCAM?
by Keith Fenner • 6,121 views • 4 months agoWhat's cooking on my PlasmaCAM? I have a problem develop with the controller and PlasmaCAM provides me with a two day turn-a-round, replacement, un...
- [COLOR=#FFFFFF !important]42:17[/COLOR]
ISAW
by Keith Fenner • 9,843 views • 5 months agoISAW; is my new, used, metal band saw, that John the owner of Apple Machine & Tool, over in Falmouth here on the cape gave me a couple months ago, ...
- [COLOR=#FFFFFF !important]30:10[/COLOR]
Hack & Tack Smack Part Two
by Keith Fenner • 16,509 views • 5 months agoHack & Tack Smack; Well every trade has it's skills and its own kind of tools and machines, some people, are really superb at their trade, but have...
- [COLOR=#FFFFFF !important]27:18[/COLOR]
Hack & Tack Smack Part One
by Keith Fenner • 15,969 views • 5 months agoHack & Tack Smack; Well every trade has it's skills and its own kind of tools and machines, some people, are really superb at their trade, but have...
- [COLOR=#FFFFFF !important]48:09[/COLOR]
American Crane Part Five
by Keith Fenner • 10,900 views • 5 months agoAmerican Crane Part Five; Finishing the turning on the three section running in the lathe and setting them up for the mounting holes to hold them i...
- [COLOR=#FFFFFF !important]31:15[/COLOR]
American Crane Part Four
by Keith Fenner • 11,271 views • 5 months agoAmerican Crane Part Four; A regroup on cutting out the center of the sprocket and grouping three plate in a stack up for gang turning. A glimpse of...
- [COLOR=#FFFFFF !important]27:43[/COLOR]
American Crane Part Three
by Keith Fenner • 10,307 views • 5 months agoAmerican Crane Part Three; Grind shape a Trepanning tool bit and silver solder it into a steel support, to cut the center out of a large sprocket. ...
- [COLOR=#FFFFFF !important]14:29[/COLOR]
Merry Go Repair Eight Grand Finale
by Keith Fenner • 6,978 views • 5 months agoMerry Go Repair; My walkie talkie beeps, around 4:30 pm on Wednesday and I answer, it's my wife, she said; we just broke the main shaft in the caro...
- [COLOR=#FFFFFF !important]14:53[/COLOR]
Merry Go Repair Seven
by Keith Fenner • 6,516 views • 5 months agoMerry Go Repair; My walkie talkie beeps, around 4:30 pm on Wednesday and I answer, it's my wife, she said; we just broke the main shaft in the caro...
- [COLOR=#FFFFFF !important]14:58[/COLOR]
Merry Go Repair Six
by Keith Fenner • 5,610 views • 5 months agoMerry Go Repair; My walkie talkie beeps, around 4:30 pm on Wednesday and I answer, it's my wife, she said; we just broke the main shaft in the caro...
- [COLOR=#FFFFFF !important]14:59[/COLOR]
Merry Go Repair Five
by Keith Fenner • 6,193 views • 5 months agoMerry Go Repair; My walkie talkie beeps, around 4:30 pm on Wednesday and I answer, it's my wife, she said; we just broke the main shaft in the caro...
- [COLOR=#FFFFFF !important]15:00[/COLOR]
Merry Go Repair Four
by Keith Fenner • 6,099 views • 5 months agoMerry Go Repair; My walkie talkie beeps, around 4:30 pm on Wednesday and I answer, it's my wife, she said; we just broke the main shaft in the caro...
- [COLOR=#FFFFFF !important]14:58[/COLOR]
Merry Go Repair Three
by Keith Fenner • 5,553 views • 5 months agoMerry Go Repair; My walkie talkie beeps, around 4:30 pm on Wednesday and I answer, it's my wife, she said; we just broke the main shaft in the caro...
- [COLOR=#FFFFFF !important]14:30[/COLOR]
Merry Go Repair Two
by Keith Fenner • 7,050 views • 5 months agoMerry Go Repair; My walkie talkie beeps, around 4:30 pm on Wednesday and I answer, it's my wife, she said; we just broke the main shaft in the caro...
- [COLOR=#FFFFFF !important]14:59[/COLOR]
Merry Go Repair
by Keith Fenner • 7,363 views • 5 months agoMerry Go Repair; My walkie talkie beeps, around 4:30 pm on Wednesday and I answer, it's my wife, she said; we just broke the main shaft in the caro...
- [COLOR=#FFFFFF !important]14:54[/COLOR]
Dressing Your Faces
by Keith Fenner • 6,133 views • 5 months agoDressing your Faces; sharp, clean and flat, is the preference to have! I finally dragged out the grinders, because I needed to sharpen up a toolbit...
- [COLOR=#FFFFFF !important]14:43[/COLOR]
The Cure
by Keith Fenner • 5,775 views • 6 months agoThe Cure; is an update on the Big Screen Elevator! We are going to be taken more time than planned to have a totally completed video showing all th...
- [COLOR=#FFFFFF !important]13:41[/COLOR]
American Crane Part Two
by Keith Fenner • 9,982 views • 6 months agoOur customer has an oldie but goodie as they say when it comes to cranes, their old American Crane is missing a few components and we were asked to...
- [COLOR=#FFFFFF !important]14:57[/COLOR]
American Crane
by Keith Fenner • 11,339 views • 6 months agoOur customer has an oldie but goodie as they say when it comes to cranes, their old American Crane is missing a few components and we were asked to...
- [COLOR=#FFFFFF !important]14:56[/COLOR]
Clam Pumper Part Two
by Keith Fenner • 6,772 views • 6 months agoClam Pumping, is a class of fishery in its self! Using on the average 1,000 gallon per minute pump, supplying water to nozzles that squirt into the...
- [COLOR=#FFFFFF !important]14:52[/COLOR]
Clam Pumper
by Keith Fenner • 7,007 views • 6 months agoClam Pumping, is a class of fishery in its self! Using on the average 1,000 gallon per minute pump, supplying water to nozzles that squirt into the...
- [COLOR=#FFFFFF !important]10:37[/COLOR]
The Rock Won Two
by Keith Fenner • 5,689 views • 6 months agoWhen the floor of the ocean comes up and smacks the bottom of your boat, propulsion systems get bent up! Over the years I've straightened my share,...
- [COLOR=#FFFFFF !important]14:59[/COLOR]
The Rock Won
by Keith Fenner • 6,784 views • 6 months agoWhen the floor of the ocean comes up and smacks the bottom of your boat, propulsion systems get bent up! Over the years I've straightened my share,...
- [COLOR=#FFFFFF !important]13:22[/COLOR]
Big Screen Elevator Part Twenty Four
by Keith Fenner • 5,109 views • 6 months agoThe Elevator has left the hanger and rumored to almost be, half way, assembled in place. I was invited to check out the last ruff wiring before, it...
Last edited by a moderator: