Hey everyone got all my proper lubes,put everything back together and everything seems to be running smooth. I still have to make some adjustments with the gibs. So as far as the issues I had I was able to address all of them and everything is working smoothly. I adjusted the power feed clutch and that is working properly, the play in the head stock is gone, idk what the issue was only thing I could see was the v belt pulley set screws weren’t tight not sure but there’s no play now. The headstock cover is sitting right now that everything is leveled, I did have to adjust the rear hinges and the bolt on bottom for motor height as well to get cover to sit right.I had a piece of brass I was able to face it just to play around any suggestions on a first project? View attachment IMG_3444.MOV View attachment FullSizeRender.mov View attachment FullSizeRender.mov
Spotted a couple of things you might find interesting. One of them I think all used lathe owners will find interesting and I'm mofing it up to the top of my
I'm a gunna." list
From Laney College, Oakland CA. Machine Tool Alignment Gauge Plans
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.