I am trying to assembly the 5c collet closer for a Logan 922 lathe. The previous owner converted the drawbar to a hand wheel. Does anyone have any documentation or parts list? I have not been able to find any information on this.
Is there supposed to be something that threads onto the rear of the spindle? Right now the lathe has a threaded bushing that I am showing removed in the attached picture.
Does it look like I am missing any pieces? It looks like there should be something for the cams to go over.
Thanks,
Darrell
![20200611_000152[1].jpg 20200611_000152[1].jpg](https://www.hobby-machinist.com/data/attachments/284/284605-ffa76ad8fd71b7b1d4bbb23e8298d7cf.jpg)
![20200611_001908[1].jpg 20200611_001908[1].jpg](https://www.hobby-machinist.com/data/attachments/284/284606-fdc05b56390e53bf585a57cb98a772f8.jpg)
![20200611_001934[1].jpg 20200611_001934[1].jpg](https://www.hobby-machinist.com/data/attachments/284/284607-cd585a38edb16fd5c741175626a0d40b.jpg)
Is there supposed to be something that threads onto the rear of the spindle? Right now the lathe has a threaded bushing that I am showing removed in the attached picture.
Does it look like I am missing any pieces? It looks like there should be something for the cams to go over.
Thanks,
Darrell
![20200611_000152[1].jpg 20200611_000152[1].jpg](https://www.hobby-machinist.com/data/attachments/284/284605-ffa76ad8fd71b7b1d4bbb23e8298d7cf.jpg)
![20200611_001908[1].jpg 20200611_001908[1].jpg](https://www.hobby-machinist.com/data/attachments/284/284606-fdc05b56390e53bf585a57cb98a772f8.jpg)
![20200611_001934[1].jpg 20200611_001934[1].jpg](https://www.hobby-machinist.com/data/attachments/284/284607-cd585a38edb16fd5c741175626a0d40b.jpg)