- Joined
- Mar 12, 2021
- Messages
- 63
Hello,
Would anyone be able to make me a gear or gearshaft not quite sure the proper term but its a long gear integrated into a shaft so gear shaft I think and that's what the parts diagram calls it. its from a older Grizz/import lathe and searches for parts so far have not turned up anything but ill continue looking as well
It's the driveshaft for the carriage on a used lathe I acquired 13 tooth though currently more like "12.5" tooth. While I have it apart to clean and reassemble figured I would see if I could find someone with the right tooling to make one. well that and i would need my lathe and a few more tools that I don't have yet to make gears to try making one myself. I have also yet been able to find a good place locally that takes small odd jobs so figured ask around here.
Here is a album of the gear/shaft with some quick dims I can send the part and the gear that it mates too (you can see the lovely off center roll pin placement grrr), I can provide better measurements but figured this should give a ballpark of the scale of the piece.
Thanks!
Would anyone be able to make me a gear or gearshaft not quite sure the proper term but its a long gear integrated into a shaft so gear shaft I think and that's what the parts diagram calls it. its from a older Grizz/import lathe and searches for parts so far have not turned up anything but ill continue looking as well
It's the driveshaft for the carriage on a used lathe I acquired 13 tooth though currently more like "12.5" tooth. While I have it apart to clean and reassemble figured I would see if I could find someone with the right tooling to make one. well that and i would need my lathe and a few more tools that I don't have yet to make gears to try making one myself. I have also yet been able to find a good place locally that takes small odd jobs so figured ask around here.
Here is a album of the gear/shaft with some quick dims I can send the part and the gear that it mates too (you can see the lovely off center roll pin placement grrr), I can provide better measurements but figured this should give a ballpark of the scale of the piece.
Thanks!