- Joined
- Jan 22, 2014
- Messages
- 160
I have the 6" rotary table.The manual for the RT is on their website,try it for the 4" RT.
I have 3 plates , most RT's have 3.
I have 3 plates , most RT's have 3.
I screwed up and ordered one of those 4" rotary table with indexing plates from Grizzly. It arrived today. Made in India, some parts look decent and some look like what you'd find on a shelf at the dollar store.
No instructions. I asked the online chat if they had anything that would help me assemble it, or unlock it, or use it, or anything else that would make it less than a paperweight and they didn't have any but said the technical support people could help me. Rather than kill a cell phone battery getting instructions online I thought I'd ask here first.
It came with an indexing plate installed - or at least attached. I don't know if it's on correctly as there is a piece between the crank and the indexing wheel that just spins around. There are two little toggle locks - one on top and one on the side. If I loosen one I can turn the table by hand. If I loosen the other I can turn the handle on the indexing plate a few degrees. That wheel seems to be some sort of cam, or it's seriously out of whack. That's all I've figured out. Googling brought me an instruction sheet from LMS for a different style table. Can anyone walk me through how to use the indexing plates, and how to remove them and put the other regular handle on before I chuck it out the back door onto the growing pile of broken and misfit toys?
thanks
Joe