- Joined
- Sep 23, 2010
- Messages
- 77
Thought I would knock one out quickly. Had an old nut laying around for pattern which turned out to be too small so had to start over. Did it the poorboy way. Just drew it with marker and indexed with square. Had to come back and fine tune it on two notches. Had this ball endmill that was close enough to achieve what I wanted.
After I realized the nut was wrong size I re-did it much faster. I have not cut the square whole for 1/2 drive or heat treated yet. Maybe in a week. tommie
After I realized the nut was wrong size I re-did it much faster. I have not cut the square whole for 1/2 drive or heat treated yet. Maybe in a week. tommie