- Joined
- Jan 18, 2017
- Messages
- 235
This is progress so far.
The center of the jaws I got with the machine are not round when tightened up. My concern is what I'm trying to do may not work. I can't see it in my head so I'm confused on angles and the center hole. Hope that makes sense. I did make mine with a longer section from the inner bolt to the inner end so I can get a smaller diameter when done. I also know that I will have to shave the bottom side between the inner bolt hole and the actual center as if I don't, it will hit the other three jaws when tightened. Do you have any idea what I need to do to get the three jaws tight and hold smaller pieces? I thank you for any info at all.