- Joined
- Oct 18, 2013
- Messages
- 4
Hello all, I bought a 10" Rockwell Delta to replace my 10" craftsman. Built a table for it, did some minor cleaning, wired it up, (220, 1hp), tried to fire it up and the belt just spins on the motor. The two belts that go up from the variable speed drive appear a bit tight. There was old grease packed into all the gears, I cleaned up most of it and put some light oil on the gears. Still no go. It feels very tight when trying to turn by hand. Any help on what to do or how to set this rig up would be appreciated.
Thank-you
Wayne
Thank-you
Wayne