Oil Can #2

I was greatly inspired by Hackmasters beautiful oil can clone. I decided to do a run of my own with a simpler design. It was suggested that I start a new thread here and not hijack the other thread.
The plan was originally solid brass. I realized that the pump housing would add too much weight so I went with an aluminum pump housing.

I was sort of emulating this original as posted by Hackmaster:

EAGLE66.jpg



Here is the base pattern:


14%2B-%2B3.jpg


14%2B-%2B2.jpg


14%2B-%2B1.jpg


Its about 3/16" thick at the edge. I will turn it down more when it is brass.


R
 

Attachments

  • EAGLE66.jpg
    EAGLE66.jpg
    25.4 KB · Views: 765
  • EAGLE66.jpg
    EAGLE66.jpg
    25.4 KB · Views: 765
  • 14%2B-%2B3.jpg
    14%2B-%2B3.jpg
    55.1 KB · Views: 761
  • 14%2B-%2B3.jpg
    14%2B-%2B3.jpg
    55.1 KB · Views: 759
  • 14%2B-%2B2.jpg
    14%2B-%2B2.jpg
    62.4 KB · Views: 758
  • 14%2B-%2B2.jpg
    14%2B-%2B2.jpg
    62.4 KB · Views: 760
  • 14%2B-%2B1.jpg
    14%2B-%2B1.jpg
    55.7 KB · Views: 758
  • 14%2B-%2B1.jpg
    14%2B-%2B1.jpg
    55.7 KB · Views: 756
Last edited:
Just did. I read everything on Back Yard metal casting.com. I think a small OIL Burner furnace is the way I will go. I stopped at my neighborhood sandwich shop / convenience store at lunch today and asked the owner what he did with his fryer oil. He took me next door to his house and pointed to a 55gal poly drum and told me to help myself whenever I wanted. So fuel is no problem.


Jamie
 
Jamie- Make sure you join Alloy Avenue.com if you have not.
R

I joined a couple of months ago. I am collecting parts for a foundry furnace. I took foundry classes in high school and college, and really liked them. Never had the facilities to do it at home, but I'm trying to change that now.

Awesome project! Thank you for posting!

GG
 
Need advice

I have never brazed SS. For the SS model I need to braze the base to the body. I do not want to TIG it 'cause it will look like crap and probably leak. I have some silver solder that is like 56% Ag. What is the correct solder to use for 304 SS and what is the correct flux? Can I get enough heat with a large propane torch or do I need Oxy? Any other tips?
R
 
Last edited:
304

15%2B-%2B3.jpg

15%2B-%2B2.jpg

15%2B-%2B1.jpg

R
 

Attachments

  • 15%2B-%2B3.jpg
    15%2B-%2B3.jpg
    47.8 KB · Views: 604
  • 15%2B-%2B2.jpg
    15%2B-%2B2.jpg
    55.5 KB · Views: 600
  • 15%2B-%2B1.jpg
    15%2B-%2B1.jpg
    56.5 KB · Views: 596
  • 15%2B-%2B3.jpg
    15%2B-%2B3.jpg
    47.8 KB · Views: 600
  • 15%2B-%2B2.jpg
    15%2B-%2B2.jpg
    55.5 KB · Views: 599
  • 15%2B-%2B1.jpg
    15%2B-%2B1.jpg
    56.5 KB · Views: 599
Last edited:
Lid

15%2B-%2B1.jpg

R
 

Attachments

  • 15%2B-%2B1.jpg
    15%2B-%2B1.jpg
    45.8 KB · Views: 593
  • 15%2B-%2B1.jpg
    15%2B-%2B1.jpg
    45.8 KB · Views: 599
Last edited:
Soldering Stainless

Not much experience soldering stainless. At first I thought I had just made a mess:

15%2B-%2B3.jpg

Then I realized the solder had flowed correctly and made a water tight seal! I cleaned it up on the lathe:

15%2B-%2B1.jpg

15%2B-%2B2.jpg

Sorry this took so long.
R
 

Attachments

  • 15%2B-%2B3.jpg
    15%2B-%2B3.jpg
    52.6 KB · Views: 595
  • 15%2B-%2B1.jpg
    15%2B-%2B1.jpg
    42.2 KB · Views: 601
  • 15%2B-%2B2.jpg
    15%2B-%2B2.jpg
    51.3 KB · Views: 598
Last edited:
Finished!

15%2B-%2B1.jpg

Seems to work just fine for cooking oil. I used food grade O rings. I hope any residual flux will not be too toxic? I cleaned as much as possible but there is always some residue.

R
 

Attachments

  • 15%2B-%2B1.jpg
    15%2B-%2B1.jpg
    47.2 KB · Views: 607
Last edited:
Back
Top