Here is a set of Lufkin Tubular Inside Micrometers, not very unusual. However the second photo is of a Lufkin 9A Height Gage Attachment for the inside mikes. You can measure between shaft using this. It has a 3/8" collet in the top of it, and I have also used it with a dial indicator as a depth gauge. It also has a beautiful case hardening on it.
Another unusual accessory is this Brown and Sharpe height gauge attachment for a combination square.
Ames Hole Test, .625. Also, two tachometers (hand held). One Starrett (black) one B&S. Yup, that first one that Don put up is a doosey. Havin fun yet? :lmao:
A few more of my indicator collection. A couple of Gladwin test indicators, these also have a scale on both sides and no reversing lever. They require a Gladwin holder to connect with anything else.
A couple of Starrett 564's test indicators. These were discontinued not too long ago. Unique to these is the tip will rotate 360° independent of the body. They also have no reversing lever.
An Ideal Tool Co. test indicator on top, also no reverse lever. Next is a Lufkin 199A, also no reverse lever. The bottom indicator appears to be homemade, and doesn't have a return spring.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.