- Joined
- Mar 26, 2014
- Messages
- 211
Well, I got my gears in today. The only one I’m waiting for is the 40T for the qcgb. The 16x32 gears are from a SB. All they need reduced in thickness and a larger bore. Plus they are new. Pictures below.
Also, how do I disassemble the spring loaded pin on the change levers? I looked at Greg’s 820 restoration. lots of info I need but I couldn’t find how to disassemble the lever. One pen is bent. I can possess straighten it. I have a picture of that also below.
Thanks!
![37E0B1A1-7AB3-4284-BCC1-D44C7CEE8A19.jpeg 37E0B1A1-7AB3-4284-BCC1-D44C7CEE8A19.jpeg](https://www.hobby-machinist.com/data/attachments/229/229617-c15aefef83a31070b9caa9b65cac592a.jpg)
![C4B4125B-5D3C-4954-B5B9-25FD501733D5.jpeg C4B4125B-5D3C-4954-B5B9-25FD501733D5.jpeg](https://www.hobby-machinist.com/data/attachments/229/229618-4c1a033959dbdf4d4de7593e9d81c3df.jpg)
![21EFD8AF-AF14-415C-921D-64DF1329B892.jpeg 21EFD8AF-AF14-415C-921D-64DF1329B892.jpeg](https://www.hobby-machinist.com/data/attachments/229/229619-b94198341106890803721dc0ed8866ac.jpg)
Also, how do I disassemble the spring loaded pin on the change levers? I looked at Greg’s 820 restoration. lots of info I need but I couldn’t find how to disassemble the lever. One pen is bent. I can possess straighten it. I have a picture of that also below.
Thanks!
![37E0B1A1-7AB3-4284-BCC1-D44C7CEE8A19.jpeg 37E0B1A1-7AB3-4284-BCC1-D44C7CEE8A19.jpeg](https://www.hobby-machinist.com/data/attachments/229/229617-c15aefef83a31070b9caa9b65cac592a.jpg)
![C4B4125B-5D3C-4954-B5B9-25FD501733D5.jpeg C4B4125B-5D3C-4954-B5B9-25FD501733D5.jpeg](https://www.hobby-machinist.com/data/attachments/229/229618-4c1a033959dbdf4d4de7593e9d81c3df.jpg)
![21EFD8AF-AF14-415C-921D-64DF1329B892.jpeg 21EFD8AF-AF14-415C-921D-64DF1329B892.jpeg](https://www.hobby-machinist.com/data/attachments/229/229619-b94198341106890803721dc0ed8866ac.jpg)