- Joined
- Jul 27, 2021
- Messages
- 221
Greetings - as I am learning more about this machine I am noticing that irrespective of how tight I tighten the bolts that fix the head, it can still be moved by hand with less effort than I think it should, and has also moved when an end mill dug into some aluminum when I took a bit more of a cut than I should have. I am wondering if this is normal or a sign of some defect that I need to address. I am not at the point where I want to do a big stabilization system at this point as a VFD is next up for this machine, but if that is what it takes I guess I will need to add that to the list.
Thanks
Thanks