- Joined
- Mar 26, 2018
- Messages
- 8,417
Hey all,
I'm no body man. This is the belt guard for the old drill press.
I plan on sanding it, primer and a nice bright color finish.
I need to get the bend out first!
One of my coworkers suggested I cut the welds, straighten then reweld. I don't want to do that.
What if I clamp it down like shown, heat the area that is bent to a dull red and tap it with a rawhide hammer?
What say you?
Thanks for ideas.
I'm no body man. This is the belt guard for the old drill press.
I plan on sanding it, primer and a nice bright color finish.
I need to get the bend out first!
One of my coworkers suggested I cut the welds, straighten then reweld. I don't want to do that.
What if I clamp it down like shown, heat the area that is bent to a dull red and tap it with a rawhide hammer?
What say you?
Thanks for ideas.