- Joined
- Dec 20, 2012
- Messages
- 9,422
Mikey, I have steppers. they are installed between the wheels and the ends of the lead screw shafts. the stepper shafts are connected to the leadscrews with couplings which have a lot of slots intended to accommodate some misalignment in the two shafts. I would be dollars to doughnuts that my saddle nuts is a tad (technical term) out of alignment and that I can improve it and then use the backlash adjustment to get the backlash down to something reasonable like what you have.
Thanks again,
john
Heh, forgot about the fact that your machine is CNC - sorry about that. I'm sure you'll get it to a reasonable point, John.