- Joined
- Dec 1, 2010
- Messages
- 1,172
Bernie
Here is what I use.
The top two pics are a modded drill press I use when doing bolt patterns. The bottom pic is the drilling rigs I use with a hand drill attached to the end. The one for the QCTP is used for side, and face drilling. The other fits my 4-way tool post, and allows me to mount up on the back side. This allows more clearance for large diameter work, and long drill bits. The wheel laying on the saddle shows what can be done in only one chucking.
Sorry the pics are 90 degree,s out of wack, again just tilt your head to the left. Gotta figure out how to fix that ,lol
![20130328_124950.jpg 20130328_124950.jpg](https://www.hobby-machinist.com/data/attachments/18/18693-c6e102c390a9fd71220b457bd82596f2.jpg)
Here is what I use.
The top two pics are a modded drill press I use when doing bolt patterns. The bottom pic is the drilling rigs I use with a hand drill attached to the end. The one for the QCTP is used for side, and face drilling. The other fits my 4-way tool post, and allows me to mount up on the back side. This allows more clearance for large diameter work, and long drill bits. The wheel laying on the saddle shows what can be done in only one chucking.
Sorry the pics are 90 degree,s out of wack, again just tilt your head to the left. Gotta figure out how to fix that ,lol
![20130522_154136.jpg 20130522_154136.jpg](https://www.hobby-machinist.com/data/attachments/18/18691-8b18d1183cba4aa89411f42573bc94af.jpg)
![20130328_124518.jpg 20130328_124518.jpg](https://www.hobby-machinist.com/data/attachments/18/18692-59a96f1045e5e68c7148d056814f482b.jpg)
![20130328_124950.jpg 20130328_124950.jpg](https://www.hobby-machinist.com/data/attachments/18/18693-c6e102c390a9fd71220b457bd82596f2.jpg)