- Joined
- Dec 12, 2014
- Messages
- 261
Just thought I would share my near complete restoration of my Super 55. I might get bashed for posting this because someone may say I'm double posting from a different sub-forum, but the Wells Index forum is kind of small.
Super excited to make some chips with this machine. I scraped it(link here), had Wells Index grind the spindle to an R8, purchased a VFD, and removed a massive pile of nasty dried up grease and crud. I'm in the market for a DRO, currently. One of the first projects will be to make the bracket for the power feed that is attached to the right side of the table. It was broken into several pieces when I bought it. The gear on the sliding shaft of the power feed is also wollered out and the key is stripped on the keyway, too. Anyway, just sharing what I'm up to in my garage.
Some pics of the progress more can be seen in the above link.
![IMG_20180407_144814_852.jpg IMG_20180407_144814_852.jpg](https://www.hobby-machinist.com/data/attachments/230/230431-924066710877b5276baadba04bfbc883.jpg)
![IMG_20180523_140332_835.jpg IMG_20180523_140332_835.jpg](https://www.hobby-machinist.com/data/attachments/230/230432-8431c61e11511e96886b68cebdeb5771.jpg)
![IMG_20180523_140332_837.jpg IMG_20180523_140332_837.jpg](https://www.hobby-machinist.com/data/attachments/230/230433-348ea76091f3530dca83165f49251f25.jpg)
![IMG_20180706_213452_289.jpg IMG_20180706_213452_289.jpg](https://www.hobby-machinist.com/data/attachments/230/230434-15c6c22716b7c91309708c043928365d.jpg)
![IMG_20180720_111303_364.jpg IMG_20180720_111303_364.jpg](https://www.hobby-machinist.com/data/attachments/230/230435-fd00675a71e6ee47cae59262d235229f.jpg)
![20180731_221235.jpg 20180731_221235.jpg](https://www.hobby-machinist.com/data/attachments/230/230436-9dc2221543719d3227f62e093d70d4b0.jpg)
![20180731_221326.jpg 20180731_221326.jpg](https://www.hobby-machinist.com/data/attachments/230/230437-838baf5bdfb6bced70a477c567649e44.jpg)
Super excited to make some chips with this machine. I scraped it(link here), had Wells Index grind the spindle to an R8, purchased a VFD, and removed a massive pile of nasty dried up grease and crud. I'm in the market for a DRO, currently. One of the first projects will be to make the bracket for the power feed that is attached to the right side of the table. It was broken into several pieces when I bought it. The gear on the sliding shaft of the power feed is also wollered out and the key is stripped on the keyway, too. Anyway, just sharing what I'm up to in my garage.
Some pics of the progress more can be seen in the above link.
![IMG_20180407_144814_852.jpg IMG_20180407_144814_852.jpg](https://www.hobby-machinist.com/data/attachments/230/230431-924066710877b5276baadba04bfbc883.jpg)
![IMG_20180523_140332_835.jpg IMG_20180523_140332_835.jpg](https://www.hobby-machinist.com/data/attachments/230/230432-8431c61e11511e96886b68cebdeb5771.jpg)
![IMG_20180523_140332_837.jpg IMG_20180523_140332_837.jpg](https://www.hobby-machinist.com/data/attachments/230/230433-348ea76091f3530dca83165f49251f25.jpg)
![IMG_20180706_213452_289.jpg IMG_20180706_213452_289.jpg](https://www.hobby-machinist.com/data/attachments/230/230434-15c6c22716b7c91309708c043928365d.jpg)
![IMG_20180720_111303_364.jpg IMG_20180720_111303_364.jpg](https://www.hobby-machinist.com/data/attachments/230/230435-fd00675a71e6ee47cae59262d235229f.jpg)
![20180731_221235.jpg 20180731_221235.jpg](https://www.hobby-machinist.com/data/attachments/230/230436-9dc2221543719d3227f62e093d70d4b0.jpg)
![20180731_221326.jpg 20180731_221326.jpg](https://www.hobby-machinist.com/data/attachments/230/230437-838baf5bdfb6bced70a477c567649e44.jpg)
Last edited: