- Joined
- Feb 7, 2013
- Messages
- 2,502
ATTACH=full]122706[/ATTACH]
The mount was made from an old friction collar from an outboard motor, my guess it was an Evinrude because of the color,
and made a bracket to hold my drill press index. The index is removable in case I want to use it over by
the lathe or mill and is held in place with some springy strapping material. The nice part is it is always
where I need it most and swings completely out of the way when not in use. It was an easy Saturday
AM project.
![IMG_0776.JPG IMG_0776.JPG](https://www.hobby-machinist.com/data/attachments/79/79992-11e9625abc857dd3025df9a726b2e8fa.jpg)
![IMG_0775.JPG IMG_0775.JPG](https://www.hobby-machinist.com/data/attachments/79/79993-d63d28864ea2854b59d1d21d52cc92f3.jpg)
and made a bracket to hold my drill press index. The index is removable in case I want to use it over by
the lathe or mill and is held in place with some springy strapping material. The nice part is it is always
where I need it most and swings completely out of the way when not in use. It was an easy Saturday
AM project.
![IMG_0776.JPG IMG_0776.JPG](https://www.hobby-machinist.com/data/attachments/79/79992-11e9625abc857dd3025df9a726b2e8fa.jpg)