- Joined
- May 7, 2015
- Location
- Escondido, CA
Thanks mikey, I appreciate all of the good info.
Joe
Joe
[QUOTE="I normally just use a cheap (from Harbor Freight) AR-8 brazed carbide tool and grind a little more clearance on the nose so the angle is less the 90 degrees. I own a set of cheap insert holders, but I've only used them about 2 times. I would rather just grind to shape I want for the job.
Just don't be afraid to mess something up. The only way I learn is the hard way. And the only way to get good at something is by doing it (experience)Thanks Carlo, you make it sound so easy. Your advise makes a lot of sense. I will keep on practicing.
Joe