Hi,
Anyone ever replace the oil seal on a VN22L for the feed drive in the knee?
Mine is leaking quite a bit unfortunately, after finally getting the machine back in nearly running order.
There was a thread over on PM that had some pictures when I last had it apart, and the oil seal was of a strange type (to me), where I have some
pictures showing this seal part no 9764.
Thanks,
Phil
Anyone ever replace the oil seal on a VN22L for the feed drive in the knee?
Mine is leaking quite a bit unfortunately, after finally getting the machine back in nearly running order.
There was a thread over on PM that had some pictures when I last had it apart, and the oil seal was of a strange type (to me), where I have some
pictures showing this seal part no 9764.
Van Norman 22L Powerfeeds Help
Dragged home a Van Norman 22L last week. It seems nice and tight, but the Powerfeeds won't engage. The problem is The Bevel Gear and Shaft (runs horizontal in to the knee) that's driven by the main Feed Gear (that runs vertical up the knee) is Slopping around in the bearings. Instead of...
www.practicalmachinist.com
Thanks,
Phil