E
ecdez
Forum Guest
Register Today
I have a VW bus with a replacement gas pedal that's made out of plastic. After a few years of fighting with it, I decided it was time to upgrade to something a little better. I still need to trim the bolt and put a good sanding to it, but I was a little proud and wanted to share.
I didn't think of it, but the wife noticed it was heavy so I had to hog out some meat on the back to lighten it up a little.
![pedal1.jpg pedal1.jpg](https://www.hobby-machinist.com/data/attachments/10/10687-cae51188ba87fae262f1c90cc6cbc34b.jpg)
![pedal2.jpg pedal2.jpg](https://www.hobby-machinist.com/data/attachments/10/10688-5e2bf9a073c5f3f43c81357fa6cc7135.jpg)
![pedal3.jpg pedal3.jpg](https://www.hobby-machinist.com/data/attachments/10/10689-aa84c2d1fb8637842ece9a695a1d7b8e.jpg)
![pedal3.jpg pedal3.jpg](https://www.hobby-machinist.com/data/attachments/10/10689-aa84c2d1fb8637842ece9a695a1d7b8e.jpg)
I didn't think of it, but the wife noticed it was heavy so I had to hog out some meat on the back to lighten it up a little.
![pedal1.jpg pedal1.jpg](https://www.hobby-machinist.com/data/attachments/10/10687-cae51188ba87fae262f1c90cc6cbc34b.jpg)
![pedal2.jpg pedal2.jpg](https://www.hobby-machinist.com/data/attachments/10/10688-5e2bf9a073c5f3f43c81357fa6cc7135.jpg)
![pedal3.jpg pedal3.jpg](https://www.hobby-machinist.com/data/attachments/10/10689-aa84c2d1fb8637842ece9a695a1d7b8e.jpg)
![pedal1.jpg pedal1.jpg](https://www.hobby-machinist.com/data/attachments/10/10687-cae51188ba87fae262f1c90cc6cbc34b.jpg)
![pedal2.jpg pedal2.jpg](https://www.hobby-machinist.com/data/attachments/10/10688-5e2bf9a073c5f3f43c81357fa6cc7135.jpg)
![pedal3.jpg pedal3.jpg](https://www.hobby-machinist.com/data/attachments/10/10689-aa84c2d1fb8637842ece9a695a1d7b8e.jpg)