- Joined
- Dec 21, 2018
- Messages
- 2,136
I've got a 20 year old, 120 Volt only, Miller wire feed using argon gas. A very basic machine with limited cycle times. But it will lay a nice bead. Obviously I can't weld very thick material but decent penetration up to 3/16". Years ago I had a big Lincoln wire feed that I could burn holes in what ever I was trying to weld. But it got stolen and costs too much, for my current needs, to replace. I've looked @ the cheap TIG machines but am suspicious by nature. Some get good YouTube reviews, again suspicious. I grew up using an old Lincoln tomb stone and an Onan gasoline powered stick. The Onan would over heat on heavy welding.