- Joined
- Nov 12, 2014
- Messages
- 153
Just returned to my old home for some final cleaning out and came across this old drive plate. It came with a bunch I stuff I bought a few years back and fit nothing I had.
It appears to be a lathe drive plate but I have no idea what it fits. Similar to a D1-4 but larger pins. The plate is about 6 3/8" diameter 15/16" thick. It has three locking pins which are 3/4" diameter. Without my measuring
tools and only a ruler the best guess is the 3 mounting pins are on a 4 1/4" diameter. There are two screw-in drive pins which are 5/8" x 2 1/8" long. I'm hoping to sell it to someone who could make use of it before it goes for scrap. Any ideas? thanks
![IMG_2460.JPG IMG_2460.JPG](https://www.hobby-machinist.com/data/attachments/80/80129-1a46a6a04c8e339ce6279f32026f30ab.jpg)
It appears to be a lathe drive plate but I have no idea what it fits. Similar to a D1-4 but larger pins. The plate is about 6 3/8" diameter 15/16" thick. It has three locking pins which are 3/4" diameter. Without my measuring
tools and only a ruler the best guess is the 3 mounting pins are on a 4 1/4" diameter. There are two screw-in drive pins which are 5/8" x 2 1/8" long. I'm hoping to sell it to someone who could make use of it before it goes for scrap. Any ideas? thanks
![IMG_2458.JPG IMG_2458.JPG](https://www.hobby-machinist.com/data/attachments/80/80127-3e34ae47e3c55c47a6595caf0461d9a9.jpg)
![IMG_2459.JPG IMG_2459.JPG](https://www.hobby-machinist.com/data/attachments/80/80128-dfa5301fd3b10fcee89bd6e2e1b3fed2.jpg)
![IMG_2460.JPG IMG_2460.JPG](https://www.hobby-machinist.com/data/attachments/80/80129-1a46a6a04c8e339ce6279f32026f30ab.jpg)