- Joined
- Oct 5, 2010
- Messages
- 1,043
Well I messed up. If you remember , I salvaged a tread mill motor and with the help of this board I got it running to eventually become a belt grinder. http://www.hobby-machinist.com/threads/treadmill-motor-help-needed.34125/page-2
Well I built the grinder and got it running. I found that the motor was running in the wrong direction. Easy fix thanks to the Board; I swapped the proper wires and the grinder started running in the right direction. Long story short, on putting the wiring in its enclosure something shorted out. I got a large volume of "magic smoke". Needless to say the board is toast. 8^(
Does anyone know where I can find a replacement board that will handle a 2.5hp tread mill motor?
TIA
Randy
Well I built the grinder and got it running. I found that the motor was running in the wrong direction. Easy fix thanks to the Board; I swapped the proper wires and the grinder started running in the right direction. Long story short, on putting the wiring in its enclosure something shorted out. I got a large volume of "magic smoke". Needless to say the board is toast. 8^(
Does anyone know where I can find a replacement board that will handle a 2.5hp tread mill motor?
TIA
Randy