- Joined
- Aug 5, 2015
- Messages
- 94
Hey. I have came by a couple new to me / used diamond wheels. I plan to use them to shape/sharpen carbide for scrapers. I have a nice olde USA made bench grinder laying around and would like to adapt the diamond wheels to fit the bench grinder. The dilemmas are that the diamond wheels have a 1 1/4" hole and the bench grinder has a 1/2" shaft that secures the wheel between a smaller hub and a 1/2" nut. I am not sure what adapter / hub/bushing I will need. If anyone knows of the correct name for the part I am describing or a link to where I could buy one I would really appreciate it. Below are a photos of one of the wheel I am hoping to put on the bench grinder.
Thanks in advance
Dylan
![image.png image.png](https://www.hobby-machinist.com/data/attachments/81/81448-a9df6389df07606c2fb1e99d5331be93.jpg)
Thanks in advance
Dylan
![image.png image.png](https://www.hobby-machinist.com/data/attachments/81/81446-d25a32a4fa4e5b035778e8f8ed915b71.jpg)
![image.png image.png](https://www.hobby-machinist.com/data/attachments/81/81447-770ec82cdd03b5b0f724998ec3aceb30.jpg)
![image.png image.png](https://www.hobby-machinist.com/data/attachments/81/81448-a9df6389df07606c2fb1e99d5331be93.jpg)