- Joined
- Mar 3, 2015
- Messages
- 171
I purchased a momentary foot switch to hook into my 14" chop saw. I thought I was purchasing a plug and play type switch but no it has to be hard wired in. The only instruction is a diagram on the bottom of the switch (photo attached). And it has a 3 wire cord wired into the switch but only cut off on the other end. I suppose I can check it out with a ohm meter to see which two wires are the ones that are connected when the switch is closed. I suppose I will have to have a J box to split the original power cord to attach it to one leg. So here are the photos, what are your thoughts.