Hey guys need some gears made or if you happen to have some around I have a 14" Hendey lathe conehead i need some gears.... more specifically the spindle gear and idle or intermediate gear that that spindle gear drivers etc..
if you have or can make at reasonable price or if you know where i can buy these I would be grateful.
the spindel gear has 32 teeth 14.5deg pressure angle
the intermediate gear is 33 teeth same pressure angle maybe other lathes use these? if you know please let me know
I do have the originals but at one point in time were damaged (bend teeth) possibly from a crash i did try to fix them file etc...not so good but my parts are leaving small flats and its very bothersome and not going to be useful long term..
Thanks for your help Merry Christmas!
Lawrence
if you have or can make at reasonable price or if you know where i can buy these I would be grateful.
the spindel gear has 32 teeth 14.5deg pressure angle
the intermediate gear is 33 teeth same pressure angle maybe other lathes use these? if you know please let me know
I do have the originals but at one point in time were damaged (bend teeth) possibly from a crash i did try to fix them file etc...not so good but my parts are leaving small flats and its very bothersome and not going to be useful long term..
Thanks for your help Merry Christmas!
Lawrence
Last edited: