7 boring nut nose hole for threading

7 boring nut nose hole for threading

  • 0
  • 0
4 trying collet

4 trying collet

  • 0
  • 0
2 chuck body threaded for spindle

2 chuck body threaded for spindle

  • 0
  • 0
12 after shaping to suit

12 after shaping to suit

  • 0
  • 0
11 done but needs shaping. Need to cut flats for wrenches.

11 done but needs shaping. Need to cut flats for wrenches.

  • 1
  • 1
10 collet body screwed inside nose. The nose is in the chuck. It will be turned down smaller.

10 collet body screwed inside nose. The nose is in the chuck. It will be turned down smaller.

  • 0
  • 0
9 nose threaded to fit chuck body.

9 nose threaded to fit chuck body.

  • 0
  • 0
8 nose taper cut and hole bored. Taper matches the end of the collet

8 nose taper cut and hole bored. Taper matches the end of the collet

  • 0
  • 0
6 threaded body and taper

6 threaded body and taper

  • 0
  • 0
5 threading body for nose cap Pick a thread to suit. The nut will be internal threaded the same.

5 threading body for nose cap Pick a thread to suit. The nut will be internal threaded the same.

  • 0
  • 0
3 inside taper cut to match the ER collet

3 inside taper cut to match the ER collet

  • 0
  • 0
1 chuck body threaded onto lathe spindle

1 chuck body threaded onto lathe spindle

  • 0
  • 0
aametalmaster

ER 40 collet chuck

Made the first ER40 chuck in 2006. Pretty simple you just need a chuck body to fit your lathe thread and then mate the ER collet to it. And a nut to hold it in.
Click to expand...

Album information

Album owner
aametalmaster
Date created
Item count
12
View count
5,526
Comment count
2
Rating
5.00 star(s) 1 ratings

Album privacy

aametalmaster

aametalmaster

Media items
66
Albums
5
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top