- Joined
- Jan 22, 2011
- Messages
- 8,031
If you decided to drill or hole saw say, a 2" hole in the table, what are you going to do to handle small holes in small parts? You also would lose close support for thin stock. Of course then you would/could deal with it with a sacrificial tooling plate or a vise. Why not just start off the way the manufacturer intended?
All things aside, it belongs to you for as long as you want to keep it. Do whatever you want to do.
All things aside, it belongs to you for as long as you want to keep it. Do whatever you want to do.