Here's one of the parts that needed repair. The hendey has a clutch mounted on the bottom of the apron that controls the lead/feed screw. Should be nice for threading. You can run forward to cut, hit neutral at the end of the cut, back your tool out, reverse back to the starting point, hit neutral again, zero the cross feed, advance the compound and hit forward. Whew.....that sounds like a lot of work. LOL. Anyway, the handle was broken. Not only that but I forgot it when I picked up the lathe so I had to go back and get it. That worked out great because I was given a lot more stuff, but that's another story. So here's the pics of the fix. I v'd it out a little and brazed it. Should be good for another 70 years.