- Joined
- Feb 24, 2018
- Messages
- 1,044
Late last week I ordered a dozen of the #250-101 tool blocks from Frank at CDCO. I got a email that 7 where shipped out on 5/25/20 and the balance was shipped out on 5/26/20. The first batch arrived today, after a little clean up (they were very oily in sealed plastic bags) and my usual change out of the set screws, I use a 8 mm x 1.25 mm x 20 mm square head, full dog point set screw, were now ready for the load up of the tooling that arrived from Glanze Tools, out of India (32.5x CCMT).
Over the years, I bought for me and work, somewhere between 350 and 400 blocks from CDCO, with never an issue, they all fit, were machine square and have worked as intended. Many of them opened up to take either 5/8” or 3/4” tool shanks.
Over the years, I bought for me and work, somewhere between 350 and 400 blocks from CDCO, with never an issue, they all fit, were machine square and have worked as intended. Many of them opened up to take either 5/8” or 3/4” tool shanks.
Last edited: