- Joined
- Mar 26, 2018
- Messages
- 8,409
Oxtool did a segment on this.
I thought I would have a go. I really enjoy working with cast iron! The one drawback is the graphite!
I'm going to cut the grooves with my 14" Delta band saw. 90 degree grid should be easy this way.
I have some lapping powder on the way. 600 and 1,200 grit.
The diamond paste will embed in the plate so I'm using garnet and silicon carbide
I thought I would have a go. I really enjoy working with cast iron! The one drawback is the graphite!
I'm going to cut the grooves with my 14" Delta band saw. 90 degree grid should be easy this way.
I have some lapping powder on the way. 600 and 1,200 grit.
The diamond paste will embed in the plate so I'm using garnet and silicon carbide
Attachments
Last edited: