spindle runout

  1. johanvergeer

    Removing radial and axial play on a Schaublin 13 milling spindle

    I have taken apart my spindle because it was running hot and thankfully the bearings still look good. Now I have to put it back together again, which I would prefer to do the right way so I don't destroy the bearings myself. I did find something in the manual, but it doesn't quite fill in all...
  2. S

    Bad spindle?

    I have a G0776 lathe and have been experiencing a large degree of runout and vibration on the spindle. When a chuck is attached it wobbles to such a degree that I have excess vibrations and can’t make any accurate cuts. I’m wondering what could be causing this. I have taken some videos to help...
  3. SuperTroye

    Newbie needs help with Logan 200 spindle runout

    Hi All, I bought a Logan 200 last year and finally getting around to getting it set up as life has caught up. I'm having a problem with spindle runout and I don't know how to fix it. I measure 0.001" runout on the outside of the spindle but 0.015" runout on the chuck.. The previous owner...
Back
Top