- Joined
- Mar 30, 2019
- Messages
- 171
I bought this lathe several years ago , mainly for the motor and the chucks that it had. But when I got it home I realized that it was too big of chucks for my Clausing 12 inch lathe and too small of spindle for my 17 inch LeBlond lathe. My 17 inch has the threaded spindke and I was hoping maybe the spindle would interchange after I realized it was too big for my Clausing. But it didn’t. I could use a L series spindle for a 15 or 17 inch lathe. I think they are interchangeable. Ok look at the pictures , most everything is for sale , except the motor and the hand wheel. I would like to trade the L0 chucks for L00. Mainly need a 12 inch four jaw and a 12 inch face plate. I used the four way also. Sorry old pictures. Contact me for any thing you need. Shipping cost is on the buyer, but I have the ability to ship everything.
Bones
Bones
Attachments
-
IMG_4967.jpeg400 KB · Views: 7
-
IMG_4966.jpeg357.9 KB · Views: 8
-
IMG_4965.jpeg379.1 KB · Views: 7
-
IMG_4964.jpeg419.4 KB · Views: 7
-
IMG_4962.jpeg467.4 KB · Views: 6
-
IMG_4961.jpeg567.5 KB · Views: 6
-
IMG_4960.jpeg449.1 KB · Views: 5
-
IMG_4945.jpeg330.6 KB · Views: 5
-
IMG_4949.jpeg417.3 KB · Views: 5
-
IMG_4950.jpeg496.2 KB · Views: 7
-
IMG_4953.jpeg503.2 KB · Views: 8
-
IMG_4926.jpeg430 KB · Views: 8
-
IMG_4928.jpeg269 KB · Views: 7
-
IMG_4929.jpeg271 KB · Views: 8
-
IMG_4931.jpeg453.9 KB · Views: 9
-
IMG_4933.jpeg442.9 KB · Views: 7
-
IMG_4924.jpeg197.8 KB · Views: 6
-
IMG_4923.jpeg210.4 KB · Views: 6
-
IMG_4921.jpeg401.8 KB · Views: 6
-
IMG_4920.jpeg430.5 KB · Views: 7