B
Bill Gruby
Forum Guest
Register Today
While we are talking precision tooling , on ebay there are two Moore Edge Finders up for grabs. I have one of these and have found nothing that is more accurate for set-ups. They are by no means cheap but these to are at the low end of the price range.
They are simple to use. Attach your DI to the quill. Put the edge finder on the edge, hole up. Lower the stylus into the hole. When the indicator reads 0 left and 0 right you are dead on the edge. This is for X axis, Y axis would be front to back.
"Billy G"
They are simple to use. Attach your DI to the quill. Put the edge finder on the edge, hole up. Lower the stylus into the hole. When the indicator reads 0 left and 0 right you are dead on the edge. This is for X axis, Y axis would be front to back.
"Billy G"