A Rear Spider-Nut for the Grizzly G0602 Lathe

HMF

Site Founder
Administrator
Joined
Sep 22, 2010
Messages
7,222
http://www.projectsinmetal.com/a-rear-spider-nut-for-the-grizzly-g0602-lathe/

Before I made any more attempts at taking on long shafts I wanted a way to really dial them in to the lathe rotation axis. A rear spider is used by many gunsmiths to do just this but they are often either bulky or installed on the work and butted against the spindle meaning that moving the work involves also moving the spider. I started thinking about what I wanted to do and how I wanted mine to work.

 

Attachments

  • Spider_Nut_for_the_G0602.pdf
    55.4 KB · Views: 155
Last edited by a moderator:
Back
Top