- Joined
- Dec 27, 2021
- Messages
- 593
Got some good lathe practice in, turning, facing, boring, knurling sort of. Ended up with a piece my cutoff tool was too short to part off, no biggie thats why we have tools. En![20220911_111748.jpg 20220911_111748.jpg](https://www.hobby-machinist.com/data/attachments/377/377385-b3c9969b8e8e439e8d0201d43f942ae4.jpg)
![20220911_123019.jpg 20220911_123019.jpg](https://www.hobby-machinist.com/data/attachments/377/377386-a048e33dd6d33153d0ebf2bfdb5e930b.jpg)
ded up with one that won't work with the vise paralell with the table, guess I'll have to make another, 12mm socket from the junkbox for the hex.
![20220911_111748.jpg 20220911_111748.jpg](https://www.hobby-machinist.com/data/attachments/377/377385-b3c9969b8e8e439e8d0201d43f942ae4.jpg)
![20220911_123019.jpg 20220911_123019.jpg](https://www.hobby-machinist.com/data/attachments/377/377386-a048e33dd6d33153d0ebf2bfdb5e930b.jpg)
![20220911_160327.jpg 20220911_160327.jpg](https://www.hobby-machinist.com/data/attachments/377/377387-5ee6a138d35d824178b1fa0093869749.jpg)