Help...shaking mill

[Bob Korves]

can you explain for a newbie?

http://www.harveytool.com/secure/Content/Documents/Tech_ConventionalMillingVsClimbMilling.pdf

 

[JimDawson]

Also could be a dull cutter.

 

[Bob Korves]

For our hobby mills, which are all considered "light" or less, climb milling must be used very carefully, at the right times and for the right purposes.

 

[ThinWoodsman]

I know there's a ton of climb-vs-conventional milling diagrams out there, but came across this one in my reading and thought I'd share it. Most diagrams change the rotation of the cutter to illustrate the difference, which is misleading - what you are usually changing is the feed direction.

 

[PT Doc]

View attachment 290406
I know there's a ton of climb-vs-conventional milling diagrams out there, but came across this one in my reading and thought I'd share it. Most diagrams change the rotation of the cutter to illustrate the difference, which is misleading - what you are usually changing is the feed direction.

Great diagram.