I press the start (green) button on my Enco 110-2031 and it stops as I let off of the button

[matthewnewbie]

I am literally having the same issue. Mine is a frejoth 900 but I read these are similar.

 

[markba633csi]

Does it operate normally when you use the carriage forward/reverse lever? (see post #10)
-Mark
ps I see what looks like a corroded wire- top left terminal 13, left contactor

 

[Flyinfool]

I see that corroded terminal to, and the terminal and wire look like they have been getting HOT. The color of the terminal is darker than the rest and the wire looks like the insulation is melting.

 

[matthewnewbie]

I am literally having the same issue. Mine is a frejoth 900 but I read these are similar.

Disregard. My direction controlls were faulty everything else was OK.

 

[markba633csi]

So the green button is for jog? The carriage lever works for F/R?
-M
Definitely repair that melted/corroded wire regardless- spray a little liquid wrench on that terminal before undoing the screw
you don't want to put too much force on that terminal- the bakelite may have been weakened by the heat
A stitch in time...