I picked up this lathe off CL, took it home and started cleaning it all up, The change gears and the idler gears were removed from the machine when i got it, the idlers were in the cabinet, change gears were lost who knows where, When i put the idler gears onto the handle and reinstall the drive pulley, i end up with the drive pulley rubbing the gears, and i am about .030 from the retaining ring, my front bearing is slightly forward of the machined surface of the housing, is it possible my spindle has moved forward? I am affraid to try and press the spindle further into the housing as i dont want to crack the housing any help would be appreciated.