- Joined
- Jan 22, 2017
- Messages
- 23
I have a question. First off, the lathe I bought isn't a CL185c, it's a CL175c. So much for that. I have drained the apron of oil which was very nasty. Now I need to fill it with kerosene or diesel fuel for cleaning. How do you fill the apron? I thought it would be similar to my Logan with screw or removable cap of sorts on the top of the apron. There is a stainless looking screw on the top left hand side that appears to be in the correct location, but it didn't want to loosen. So,,, I thought I'd better seek the advice of the experts!
Thank you,
steve ironhorse18@frontier.com
Thank you,
steve ironhorse18@frontier.com