Making Headstock Shims For The 9a

HMF

HMF

Site Founder
Administrator
Joined
Sep 22, 2010
Messages
7,223
Stack up a bunch of different thicknesses of brass shim stock, screw them together on a board and cut them out with a very slow feed and a carbide cutter.

spindle1.jpg


Pattern file for the shims is attached.
 

Attachments

  • sb9_shims.dxf
    18.8 KB · Views: 5
Use some spray on contact cement for fixing the shim stock.
 
You must log in or register to reply here.
Back
Top