Model Craft Engine - Need some Help

[Canuck75]

I wonder if anyone out there can help in finding a source of proper drawings for the Model Craft racing gas engine? The write up available on-line at "Plans-for-everything.com" as "Moore model engine" free download is missing a lot of data and the photos are of extremely poor quality. This is a 2 cycle spark ignition engine and could be made from bar stock.
Would appreciate any help.

 

[Eddyde]

This is all I could find. It says it was available as a kit of castings so as far as machining instructions, it appears these 2 articles are all the info there is.

 

[Canuck75]

This is all I could find. It says it was available as a kit of castings so as far as machining instructions, it appears these 2 articles are all the info there is.

Thanks for your reply. Yes, that is all I could find as well. Critical data would include the piston shape and porting in and out of the crankcase. It is very interesting that each side of the crankcase operates separately. Hopefully someone will come up with a source.