Need help finding a pair of bearings

[Janderso]

These are out of a small bench top Rockwell 4” jointer.
I haven’t had much luck.
Made in USA, Norma X154PP. ID is .394”. OD is yet to be determined. I need to find my small puller
I need a pair.
Thank you!!

 

[westerner]

Once you have ID, OD and thickness, your local parts house will be able to track em down.
Bearing seal/shield options will be the last to decide on. Expressed as a suffix in the part number.

 

[mmcmdl]

Jeff , we have a quite a stock of bearings and I have loads at home . 10 mm ID . Don't know the OD yet ?

 

[Ulma Doctor]

here are some common bearings with a 10mm bore....
200P, 6200, 200KDD all have 30mm OD and 9mm width (10x30x9)
100KS and 6000 have a 26mm od and 9mm width (10x26x8)

i would suggest the 2RS versions ( i.e. 6000-@rs or 6200-2RS)
the ZZ versions are only dust shields, which work ok
the 2RS means 2 rubber (neoprene) seals
the neoprene seals are superior for keeping contaminants out, where the ZZ counterpart is only designed to keep dust out

before you go buy the bearings, verify the OD and width for me, i have lotsa bearings lying around
i'd be happy to share

 

[Janderso]

You guys are the greatest!
I’ll let you know on the size.
Thank you!

 

[ErichKeane]

If they can't help ya, I like VXB.com for inexpensive and surprisingly high quality bearings.

 

[Brento]

Not to piggy back from this post but @Ulma Doctor i loved your post way back about your cross drilling tool post. Do you remember the style bearings you used?

 

[Ulma Doctor]

Not to piggy back from this post but @Ulma Doctor i loved your post way back about your cross drilling tool post. Do you remember the style bearings you used?

PM sent