- Joined
- Jun 6, 2015
- Messages
- 283
Hi all,
The on/off/direction switch on my lathe has failed. One of the contractors burnt up. I am having trouble finding a replacement. The pictures show what was in there.
There are 6 wires going to the switch, 2 power, then 4 back to the motor. Wired for 110 volts. The machine is a 1984 Jet lathe.
Thanks,
Jason
The on/off/direction switch on my lathe has failed. One of the contractors burnt up. I am having trouble finding a replacement. The pictures show what was in there.
There are 6 wires going to the switch, 2 power, then 4 back to the motor. Wired for 110 volts. The machine is a 1984 Jet lathe.
Thanks,
Jason