- Joined
- Nov 19, 2012
- Messages
- 26
Finally, got well enough to spend a day in the shop. Yippee!
Took a new to me 4 jaw with a too small faceplate and machined it out and threaded it for the Clausing. Tore the 4 jaw down and cleaned and lubed it up. On to better and bunches of chip making!!
Took a new to me 4 jaw with a too small faceplate and machined it out and threaded it for the Clausing. Tore the 4 jaw down and cleaned and lubed it up. On to better and bunches of chip making!!