- Joined
- Aug 23, 2013
- Messages
- 970
Learned something new today, I was able to get a 10 uM Microsyn reader head to work with a 5 uM rod. I also learned that the 10 uM goes to .0001 and the 5Um reads to .000001 on a DP700 display. I had some parts that I was able to try out installing it on a Jet JDM18 mill. Now I just need to verify accuracy with a .0001 indicator. Tim
I will try to see how the 10 uM rod with a 5 uM reader works in the near future.
I will try to see how the 10 uM rod with a 5 uM reader works in the near future.