SB 7"

[Ultradog MN]

I brought this home this week.
It is a bit rough but seems to be mostly complete except it is missing the round cover on the side.
I will fashion some sort of cover for it.
The belt guards seem to be a bit fragile so I removed them while I wrastle it around, cleaning it, etc.
I removed the motor and switch too. Am going to rewire it for 110v. It was 220.
Probably won't do a lot with it till this winter.
Will be a nice project in my little shop office - the only place I have heated.
I did not get the cabinet for it but don't mind too much as I can make a stand for it.
What are the chances of ever finding an original round side cover for it?

 

[Martin W]

Nice project! I like it.
Martin

 

[tweinke]

Nice! Sounds like a nice winter project. I have spotted a cover on eBay a time or two.

 

[CluelessNewB]

I have seen the cover on eBay in the past but fabricating something that would work seems easy enough to get going. Just keep an eye out for one on eBay.

 

[Ulma Doctor]

Very cool!
Lotsa fun to be had with a shaper!

 

[NCjeeper]

Nice rescue.

 

[SLK001]

Did you get the stand with it?

 

[Dave Smith]

now you need a good heavy stand to hold both the shaper and your heavy drill head.
Dave